热系统 -美国Tempco热系统-加热器
Cabinet Enclosure Heaters阁罩加热器
阁罩加热器旨在帮助电气，电子，气动，液压和机械设备进行顶部能力保护它们免受低温，冷凝和腐蚀。
Tempco enclosure heaters are the answer to all your enclosure heater needs. Our heaters are designed to help electric， electronic， pneumatic， hydraulic and mechanical equipment perform at top capacity by protecting them against low temperatures， condensation and corrosion. Tempco offers many different styles of heaters that can be used in enclosure heating applications. Our most popular styles are displayed on the next few pages.
Typical Applications
•Traffic Signal Control Boxes
•Automatic Teller Machines
•Outdoor Electrical Power Enclosures
•Control Panels
•Control Valve Housings
•Switch Gear
•Clothing Lockers
Determining the Minimum Wattage for Your Application
• Determine the lowest temperature to which the enclosure is expected to be exposed.
• Determine the operating temperature to which you want the enclosure heated.
• Subtract the ambient temperature from the the enclosure temperature to get the temperature change required.
• Calculate the surface area of the enclosure. For a rectangular enclosure use the formula:
2 [(Length × Width) + (Length × Height) + (Width × Height)]
• Select the correct table below depending upon whether your box is insulated or non-insulated. Read from the table the wattage required depending upon your calculated temperature change and surface area.
• Add an additional 50％ of the determined wattage if the enclosure is to be located in windy conditions
Selecting the Right Heater for Your Application
1. Determine the wattage of heater(s) that you need. See the instructions on this page to determine your wattage requirements.
2. Determine the type of heater that you need. Depending upon conditions， one heater type might be better than others. Items to take into consideration are space constraints inside the enclosure and wattages required.
3. Determine the number of heaters you need. You can combine multiple heaters to achieve your wattage requirements.
4. Determine how you will control the heaters. Will you use built-in thermostats to monitor the temperature? Or will you use a single temperature control to monitor and control the heaters? Tempco manufactures a wide range of temperature control devices and when multiple heaters are required， Tempco can supply you with the temperature controls that will meet your needs.